We have a logiq 9 and the image is grainy. Is the issue with the CRT or a board? If it is the boards, which board is responsible for the image?

It is not the monitor if only the image sector is grainy. Check to see if other imaging modes, such as M mode, PW, or color Doppler, are exhibiting any artifacts. If the problem is only in 2D and M modes, I would consider replacing the BMP board. However, try reloading software before replacing any hardware.

end faq

{accordionfaq faqid=accordion16221 graybarfaq arrow headerbackground headerborder contentbackground contentborder round5}