I have a Siemens X300 with boot up problems. First, I found the DC/DC power supply with problems, causing the leads on the USPA-AC power supply to light up. Having repaired the DC/DC power supply, on power up the system hangs on the message “Checking system configurations.” All the voltage tests are OK. What could be the problem? Best regards. –
There are a lot of factors to consider. Will you be doing a lot of 3D imaging? If so, the Voluson is the better system. Otherwise, I would choose on budget. The HD11 is a little higher end unit but is also more expensive, so you have to balance marginal image quality improvements with overall price.
end faq
{accordionfaq faqid=accordion16259 graybarfaq arrow headerbackground headerborder contentbackground contentborder round5}